Posted on

Focusrite 2i2 Studio Bundle Price and Honest Review (India)

Focusrite-Scarlett-2i2-Studio-2nd-Gen-USB-Audio-Interface-and-Recording-Bundle-with-Pro-Tools

If you are planning to make a low budget home recording studio then you might be thinking if Focusrite 2i2 Studio Bundle is good or bad for your recording studio?

Focusrite-Scarlett-Studio-USB-audio-interface-Recording-Package

 

I personally use this audio interface with the mic and headphone provided, since 15months and believe me it makes a superb sound so far.

What is inside box of Focusrite 2i2 Studio Bundle?

Focusrite Scarlett 2i2 Studio 2nd Gen USB Audio Interface and Recording Bundle (Electronics)


List Price: INR 22,956.00
New From: INR 20,600.00 In Stock
Used from: Out of Stock

You get these devices with Focusrite 2i2 Studio Bundle:

  1. Focusrite 2i2 Audio Interface
  2. Condenser Microphone with 48V phantom power
  3. A Studio quality reference headphone
  4. Free DAW software (Most Probably Cubase LE/Protools)
  5. Free Plugins linke Focusrite Compressor, Bass plugins etc.
  6. An XLR Cable to connect Microphone to the Interface
  7. A 6.3mm to 3.5mm connector for connecting the Interface to the normal headphones too!

Plus Points of Focusrite 2i2 Studio Bundle:

  1. Comes in Low Budget
  2. Includes all the basic needs for a good start up of even professional recording studio
  3. Headphones and Mic quality is very nice
  4. Comes with a Free Professional Recording Software, so you don’t need to purchase an another software.
  5. No confusion for the beginners musicians because it contains all the quality products

Minus Points of Focusrite 2i2 Studio Bundle:

  1. It doesn’t come with a MIC stand and Pop filter which are very essential for Recording
  2. Doesn’t come with Extra Audio Beats loops/samples
  3. There is no direct plugging option for headphones, you have to use additional 6.3mm to 3.5mm converter
  4. There is no fixed software, somewhere it comes with Protools, somewhere with Cubase and Ableton Live too.

Price of Focusrite 2i2 Studio Bundle in India?

The price of this bundle keeps fluctuating between 16000 Rupees to 20000 Rupees (as in Apr 2017)

Should one go for Focusrite 2i2 Studio Bundle ?

Yes, if you are unable to decide the exact models of Audio Interfaces, Microphones and Headphones, then its good to go with! Click here to buy this Studio Bundle now from Amazon.

Write below in the comments if you still have questions!

Posted on

Focusrite Scarlett 2i2 Set Up! How to Connect Focusrite Scarlett 2i2 to Computer, Audacity, Cubase, FL Studio or Other Recording Software?

thumbnail-how-to-connect-focusrite-scarlett-2i2-interface-to-computer-pc-laptop-mac-audacity-fl-studio-windows-cubase-daw focusrite scarlett 2i2

If you have purchased your Focusrite Scarlet solo or Focusrite Scarlett 2i2  or higher end audio interface then you need to set up it properly, so that it can work properly in your computer. If you have not purchased it so far, then you can GET IT NOW ON AMAZON.

You can use this Focusrite 2i2 audio interface for either listening songs or for recording and mixing songs in professional audio editing software.

This article will show you that how you can make this audio interface work  in your PC. Please read the following,  step by step set up,  process carefully. If you have already connected this interface to computer and facing any problem, then you should disconnect it before proceeding further.

1. Register Your Interface

After purchasing this audio interface, you need to register this device on the official website of Focusrite. You need to sign up and enter your device’s serial number there after selecting your device. You may also get the free licences of the audio editing software or VST Effects plugins (if provided free with interface). Please follow THIS LINK to register your device.

Select your product and Enter Serial number of Focusrite 2i2 Audio Interface (You can find it below device)

Enter your email ID and click on “Get My Stuff” to get the licences of Free Software or Plugins (If any Provided with Interface)

2. Download the Drivers

After successfully registering your interface to the Focusrite website, you have to download the supporting driver for your device. For downloading the driver you need to VISIT THIS LINK. Then select your device model and click the download button given below.  This may be around 5MB.

Select Focusrite Scarlett 2i2 (2nd Gen) from Drop Down Menu
Click on the Driver’s name to Download Driver

After downloading Install the driver as per given screenshots:

Restart the computer (After Reading this article :)!

Changes will be done when you restart your computer. (Don’t forget to bookmark this page if you are restarting your computer now!)

3. Connect Interface to Computer/Laptop with USB cable

Now driver is installed on your computer and all you need to connect the Focusrite Scarlett 2i2 interface to your computer/laptop with USB cable provided with this interface. One end of this cable will be connected to the interface’s back side. Another is just same as a Pen Drive USB plug which you can connect in your PC.

Focusrite Scarlett 2i2 connects with a USB cable to Computer
Connect one end of USB Cable to Interface’s back side slot
Connect USB end to computer’s USB port (Preferably high speed Port)

4. Connect Headphone and Microphone

This interface supports 6.3 mm jack headphone, so you may  need to use a headphone with 6.3 mm jack. But you can also use your basic earphone of 3.5mm jack after attaching an 6.3mm adaptor which you can SHOP ONLINE HERE. Then you need to connect a mic too. The mic can be connected with either XLR Cable or 6.3mm Jack. Follow these photos for setup:

6.3mm jack adapter is required to connect a 3.5mm Headphone

Secro (Pack Of 2) 6.35Mm Male To 3.5Mm Female Stereo Jack Headphone Adapter Converter – (Electronics)


List Price: INR 395.00
New From: INR 234.00 In Stock
Used from: Out of Stock

 

3.5mm headphone is connected with 6.3mm adapter
You can use this type of adapter to listen from two headphones (One for Singer and another for Recording Technician)
Connecting an XLR Mic to the interface “Input 1”
In left side microphone is connected and in Right side an headphone is connected with 6.3mm adapter, while from backside it is connected with computer with USB cable
Put on the 48V Phantom power button if your microphone works only with phantom power. A red light will glow from the button to indicate that its phantom power is working.
Adjust the Gain Controller knob while speaking to the mic. Ensure that there should be only green light while speaking. Red light means the sound is getting distorted due to too much gain. Hence you need to adjust it so that it does not show red light at your maximum singing volume.

Now the connectivity is over and we will do some settings in Control Panel to listen the audio through our Focusrite Scarlett 2i2 Audio Interface.

Setting up Focusrite Scarlett 2i2 in Control Panel:

  1. Go to control panel
  2. Open “Hardware and Sound” 
  3. Go to Sound –> Manage Audio Devices
  4. Go to Playback
  5. Identify the Newly added Focusrite Device
  6. Right Click –> Enable
  7. Again Right Click –> Set as Default Communication Device
  8. Similarly Set up Recording Device too
  9. Play any song in your computer and you should listen the sound through your Interface’s Earphone.

Setting up Focusrite Scarlett 2i2 in Audacity:

  1. Open Free Audio Editing Software Audacity
  2. Go to Audacity Device Toolbar as shown in the below screenshot
  3. Right to Microphone icon, select the Scarlett Audio Interface from slide menu
  4. Right to Speaker icon, Select the Scarlett Audio Interface from Drop Down menu
  5. Do some recording (if you are connected with mic) or drag some audio sample/song in the audacity work area and play. You should listen the sound through the Focusrite Scarlett 2i2 headphone.

Setting up Focusrite Scarlett 2i2 in FL Studio

  1. Launch FL Studio software in your computer.
  2. Go to Options–> Audio Settings
  3. On the top most Drop Sown Menu, select the Direct Sound Devices–> Scarlett 2i2 USB
  4.  In the mixer output–> Select Scarlett 2i2
  5. Play something and you should listen sound through the Focusrite Scarlett 2i2 Audio Interface’s headphone.
  6. Similarly you can also select the input while recording audio in the FL Studio

Setting up Focusrite Scarlett 2i2 in Cubase

Please read the steps carefully and follow one by one.

Connecting Interface to Cubase

  1. Generally Cubase will ask you on the starting up. Select the “Focusrite USB 2.0 Audio Driver”. DO NOT SELECT ASIO here because it will be having a little latency.
  2. If Cubase does not give options on starting up then go to Menu Bar–> Devices –> Device Setup…
  3. Go to VST Audio System–> Drop down menu–> Focusrite USB 2.0 Audio Driver
  4. Pop up menu–>Switch
  5. Now you can see the changes made in Drop down menu.
  6. Press OK
  7. Go to Devices–>VST Connections
  8. Remove Existing Buses in Input and Output (Right Click on Audio Device–> Remove Bus)
  9. Now we have two inputs on the interface, so we can either record a stereo track (Left and Right mics together) or two mono tracks. It means we have to make three Buses: 1 Stereo + 2 Mono

Add Audio Buses

  1. Click–> Add Bus–> Select Count=1–>Configuration=Stereo –>> Give a Name to the Bus–> Add Bus. You can see a bus added there.
  2. Now add two mono buses: Add Bus–> Count: 2–> Configuration=Mono–>Give a Name to the Bus–> Add Bus. You can see the changes.
  3. In device port Mono Bus 2, click and select= Input 2 (Right)
  4. Lets add output Bus too. Add Bus–> Count=1–>Configuration=Stereo–>Give a name to the bus–> Add Bus. You can see an output bus has been added.
  5. Now close the VST connections Pop up and make a new project by going in File–>New Project. Select any type of project preset or select empty.
  6. Go to project add track–> Audio–> Add stereo track.
  7. Go to the left inspector window. Locate the inputs (you will see the name of the stereo bus you have given). Then select the mic 1 or 2 which you have connected in your interface. Click on the speaker button and you must listen what you speak in your mic.
  8. You can also record by pressing the red recording button and can do the experiments with the inputs and outputs.

If you are still having any problem regarding set up of Focusrite Scarlett 2i2 Professional Audio Interface then you may write at the forums at: http://www.musicalmahesh.com/online-music-learning-discussion-forums-community/other-audio-editing-softwares-dawmusic-composing-discussions/

Do write in comments for any assistance. If you want to get more cheaper version of Focusrite then you may also like to Purchase Focusrite Solo from Amazon.

Focusrite Scarlett 2i2 (2nd Gen) USB Audio Interface (Electronics)


List Price: INR 13,773.00
New From: INR 11,799.00 In Stock
Used from: Out of Stock

If you want to buy other Audio Interfaces, then you may like to Visit This Page.